Non-leafing Aluminum Pigment Powder for Protective Coating | Aluminum Powder

Non-leafing Aluminum Pigment Powder for Protective Coating | Aluminum Powder

Short Description:

Aluminum Pigment Powder, commonly known as "silver powder", i.e. silver metallic pigment, is made by adding a small amount of lubricant to pure Aluminum foil, crushing it into a scale-like powder by pounding and then polishing it. Aluminum Pigment Powder is light, with high leafing power, strong covering power, and good reflecting performance to light and heat. After treatment, it can also become non-leafing Aluminum Pigment Powder.

                                  

Common Name:  Aluminum Powder

Other Name:  Aluminum Pigment Powder

Appearance:  Silver Powder

MOQ:  25KGS


Product Detail

Product Tags

Grade

Non-Volatile Content (±2%)

D50 Value (μm)

Sieve Residue (44μm) ≤ %

Surface Treatment

LP1410

80

10

0.3

SiO2

LP1413

80

13

0.3

SiO2

Aluminum Pigment powder can be used to identify fingerprints, but also to make fireworks. It can also be used for all kinds of powder coatings, leather, inks, leather or textiles, and so on. Aluminum Pigment Powder is a large category of metallic pigments because of its wide use, high demand and many varieties.


This series of Aluminum pigments powder is designed for powder coatings industry, within the squeeze-type products.

        • Mainly used in hammer powder coating.

          1. 1.Please test the product quality before using.
          2. 2.Avoid any conditions that will suspend or float powder particles in the air, keep away from high temperature, fire during using process.
          3. 3.Tighten the drums cover of the product soon after using it, storage temperature should be at 15°C- 35°C.
          4. 4.Store in cool, ventilated, dry place.After long time storage, the pigment quality might be changed, please re-tested before using.


    1. 1.Once a fire breaks out , please use chemical powder or the fire-resistant sands to put it out.No water should be used to put out the fire.
    2. 2.If the pigment enters eyes by accident , should wash them with clean water for at least 15minutes and turn to doctor for consultation in time.

    Small amount of discarded Aluminum pigment can only be burnt in a safe place and under the supervision of authorized persons.




  • Previous:
  • Next: