Leafing Mirror Effect Aluminum Pigment Powder | Aluminum Powder
|
Grade |
Non-Volatile Content (±2%) |
D50 Value (±μm) |
Screen Analysis |
Surface Treatment |
|
|
<90μm min. % |
<45μm min. % |
||||
|
LP06S |
90 |
6 |
-- |
99.0 |
SiO2 |
|
LP13G |
90 |
13 |
-- |
99.0 |
SiO2 |
It appears as flake particles and after well dispersed on carrier, particles connect, fill up each other to get continuous and compact coating, which performs good hiding and shielding power to prevent the corrosion from moisture, gas and sunlight etc. on substrates.
-
-
-
Typically applied to powder coatings, printing inks, masterbatches, textile etc.
- 1.Please test the product quality before using.
- 2.Avoid any conditions that will suspend or float powder particles in the air, keep away from high temperature, fire during using process.
- 3.Tighten the drums cover of the product soon after using it, storage temperature should be at 15°C- 35°C.
- 4.Store in cool, ventilated, dry place.After long time storage, the pigment quality might be changed, please re-tested before using.
-
-
- 1.Once a fire breaks out , please use chemical powder or the fire-resistant sands to put it out.No water should be used to put out the fire.
- 2.If the pigment enters eyes by accident , should wash them with clean water for at least 15minutes and turn to doctor for consultation in time.
Small amount of discarded Aluminum pigment can only be burnt in a safe place and under the supervision of authorized persons.