Fluorescent Pigment for Low Temperature Plastics
|
Specification |
Value |
|
Density (g/cm3) |
1.36 |
|
Shade (Compared with standard) |
Similar |
|
Average Particle Size (μm) |
10 max. |
|
Soften Point (°C) |
115-125 |
|
Heat Resistance (°C) |
190 min. |
|
Oil Absorption (g/100g) |
45 |
|
Tinting Strength (Compared with standard) (%) |
95-105 |
|
COLORCOM Fluorescent Pigment Type |
Color Sample |
|
MW131-Flu.Pink |
|
|
MW137-Flu.Rose |
|
|
MW151-Flu.Red |
|
|
MW153-Flu.Orange Red |
|
|
MW161-Flu.Orange |
|
|
MW163-Flu.Orange Yellow |
|
|
MW171-Flu.Yellow |
|
|
MW173-Flu.Lemon Yellow |
|
|
MW181-Flu.Green |
|
|
MW191-Flu.Blue |
|
|
MW113-Flu.Violet |
|
|
MW115-Flu.Magenta |
|
MW series’ are low temperature plastic pink, rose, red, orange red, orange, orange yellow, yellow, lemon yellow, green, blue, violet, magenta fluorescent pigment with brilliant colors, high tinting strength, excellent fluorescence effects, good dispersion. It is green fine powder and not easy to stick screw during processing. These are applicable for coloring for all kinds of plastics such as PP, PE, PVC with processing temperature not higher than 190°C, as well as coatings required limited solvents resistance.
(1) Plastic injection moulding of all kinds, temperature resistance up to 195°C.
(2) Gravure and letterpress printing inks.
(3) Screen printing and textile printing.
(4) PVC plastic and PVC organic solvents.
(5) Water-based solutions and weaker organic solvent products.
Packaging: 25kg/Composite Paper Bag lined with PE film bag.